玉溪伴游

潜江附近想过夜电话联系

 Slag scraper manufacturer_ Price of slag scraper_ Mine slag scraper

Slag scraper Industry brand For many years, we have been specialized in mucking out of shaft and roadway

National hotline: 178-7115-0018

News Center

Based on the forefront of the industry and grasp the market motivation

How to deal with the belt running in of the belt conveyor after 80 running in period

 Back to list Source: yonglitong Release date: August 7, 2020 8:38:03 Browse:

A new mining slag raking machine will have a running in period when it comes to the mine for the first time. In the early stage of adaptation, the working efficiency is very high, which is a bit like that when new employees come to work, they have high enthusiasm. After getting familiar with all kinds of roadway environment, you will find that the working state of slag raking machine is weak and the efficiency is slow. Today, we talk about the reason why the 80 wheel belt slag remover is weak and how to make it return to the normal state.

        Mine slag scraper (13). Jpg

The main reason for the weakness and slow speed of 80 wheel belt slag raking machine is the decrease of thinking power and internal leakage of hydraulic system due to the wear of all parts of the machine. The hydraulic pump of slag raking machine is plunger variable pump. The internal hydraulic components of the pump (cylinder block, plunger, distribution plate, nine hole plate, turtle back, etc.) will change after working for a period of time. Long time load operation, excessive wear will lead to internal leakage, the data of various technical parameters are not coordinated, resulting in insufficient oil temperature, affecting the working speed of slag raking mechanical valve. At this time, it is necessary to carry out a comprehensive overhaul of the whole machine, and the parts beyond the limit of wear shall not be used again.

         Mine slag scraper (1). Jpg

1. Before the operation of 80 wheel belt slag remover, the hydraulic oil must be added to the fuel tank for more than 4 / 5. The hydraulic oil must be replaced after working for 100 hours. The second replacement should not exceed 600 hours and must be replaced at least once a year. The hydraulic oil filter element must be replaced at the same time to ensure that the oil tank is clean.

2. In general, pay attention to check whether the conveyor belt of the slag scraper is deviated or seriously worn, and correct and replace the conveyor belt in time.

        Mine slag scraper (11). Jpg

3. The quality of the shaft will be affected by the poor pushing efficiency of the pickling arm and the bearing sleeve. Solve the problem in time when you find it, don't think it can be used.

The above is yonglitong professional production slag raking machine manufacturers after repeated verification and combined with the 80 wheel belt slag scraper in different mine use experience, I hope to help you.


Recommended reading

[editor in charge]: yonglitong. All rights reserved Slag scraper Please indicate the source of reprint

National Service Hotline 178-7115-0018

Xiangyang yonglitong Machinery Co., Ltd
Contact person: Manager Tong Tel: 0710-3725679 mobile phone: 178-7115-0018
Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province
All rights reserved: Xiangyang yonglitong Machinery Co., Ltd. all rights reserved, professional slag raking machine and ore raking machine manufacturer
Hubei ICP Bei 17006913-2      Website map

National hotline:
178-7115-0018

 Scan more wonderful! Scan more wonderful!