金昌桑拿

潜江附近想过夜电话联系

 Slag scraper manufacturer_ Price of slag scraper_ Mine slag scraper

Slag scraper Industry brand For many years, we have been specialized in mucking out of shaft and roadway

National hotline: 178-7115-0018

News Center

Based on the forefront of the industry and grasp the market motivation

Matters needing attention and operation method of mine slag scraper

 Back to list Source: yonglitong Release date: September 4, 2020 8:36:50 Browse:

Mining slag raking machine operation method, said simply is to master the multi-channel control valve or hydraulic pilot, each handle action control arm, bucket lifting, and vehicle braking. However, it is necessary to have practical operation practice in order to speed up. If you are interested in learning how to operate the slag raking machine, our company provides professional slag raking machine operation training.

        (1).jpg

   Wheel type slag remover Generally, the operating valve with seven links and five rods is used, which is easy to learn and has low failure rate; Crawler slag scraper The hydraulic pilot, easy to operate, accurate control, good stability.

When the mine slag scraper is working in the mine, due to the limited effect of smoke exhaust and dust discharge in the mine shaft, there are more dust, cinder and fine rock particles, so the following matters should be paid attention to.

1. The operator should not push the handle by force. In order to avoid sticking or failure of the operating valve, pay attention to cleaning the blockage.

2. The materials set by each model of mine slag raking machine pass the size limit, and the belt is easy to be scratched by force, which seriously affects the service life of the equipment. (if there are a lot of large rocks in the project, it is suggested to install a hydraulic breaking hammer, which will not cost much.)

3. Clean the slag raking machine regularly or timely according to special conditions, especially the easily blocked gas components, radiator, filter, diverter valve, safety valve, etc., so as to make the machine light.

4. Regularly add grease to the connecting pin shaft parts such as the big and small arms of the slag raking machine and the bucket to delay the wear.

5. When the hydraulic oil is replaced regularly, dust will inevitably be mixed into the mine. If the dust accumulated for a long time is mixed into the hydraulic system, the hydraulic oil will deteriorate and affect the normal operation of the equipment.


Recommended reading

[editor in charge]: yonglitong. All rights reserved Slag scraper Please indicate the source of reprint

National Service Hotline 178-7115-0018

Xiangyang yonglitong Machinery Co., Ltd
Contact person: Manager Tong Tel: 0710-3725679 mobile phone: 178-7115-0018
Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province
All rights reserved: Xiangyang yonglitong Machinery Co., Ltd. all rights reserved, professional slag raking machine and ore raking machine manufacturer
Hubei ICP Bei 17006913-2      Website map

National hotline:
178-7115-0018

 Scan more wonderful! Scan more wonderful!