秦皇岛伴游

潜江附近想过夜电话联系

 Slag scraper manufacturer_ Price of slag scraper_ Mine slag scraper

Slag scraper Industry brand For many years, we have been specialized in mucking out of shaft and roadway

National hotline: 178-7115-0018

Zwy-50t small slag scraper

1. This machine is equipped with a new type of Gu self sealing pressure pipeline filter. The filter can remove or prevent the mechanical impurities mixed in the hydraulic oil and the colloid and carbon residue produced by the chemical change of the hydraulic pressure itself, so as to prevent the valve core from being stuck, the throttling hole, the gap and the damping hole blocking, and the hydraulic components wearing too fast
Whole machine weight (kg) two thousand and seven hundred Loading capacity (m3 / h) ≤50 Main motor power (kw) eleven Overall dimension (mm) 5000*1350*1500 Price (10000 yuan)
Product classification: Zwy-50t type
Order hotline: 178-7115-0018

Product introduction

1. This machine is equipped with a new type of Gu self sealing pressure pipeline filter. The filter can remove or prevent the mechanical impurities mixed in the hydraulic oil and the colloid and carbon residue produced by the chemical change of the hydraulic pressure itself, so as to prevent the valve core from being stuck, the throttling hole, the gap and the damping hole blocking, and the hydraulic components wearing too fast.

2. The front end of the conveyor frame is supported by three rows of square tubes, and the strength of the square tubes is three times of that of the triangle iron. Even if the larger stones are transported through the material outlet, the support frame will not be bent and deformed. The inner side of the rear of the conveyor frame is supported by angle iron, which not only ensures the sufficient strength of the tail of the conveyor frame, but also better protects the cable of the conveying drum from friction and extrusion by the conveyor belt and stones. 16 mm steel plate is installed on both sides of the front end of the conveyor frame, which can ensure that the conveyor frame will not break and deform under normal working condition.

3. Before the improvement of the conveyor support, the opening of the support was not closed, and the roller was easy to loose and fall off when the conveyor frame vibrated greatly, so it was troublesome and time-consuming to install the conveying roller, and the conveyor belt was easily scratched. Even if the carrier roller falls off again, it will not be scratched by the carrier roller.

technical parameter

ZWY1.2-50T -4B-DQ Technical parameters of small slag scraper
project parameter
model ZWY1.2-50T-4B-DQ
Loading capacity( /h) ≤50
Overall mass (kg) two thousand and seven hundred
Wheelbase (a) (mm) one thousand and three hundred
Track width (front / rear) (mm) one thousand and eighty
Minimum turning radius (m) ≤5
Excavation width (b) (mm) two thousand and two hundred
Excavation distance (c) (mm) ≥1300
Excavation depth (z) (mm) four hundred and sixty
Excavation height (H) (mm) one thousand and six hundred
Height of the highest unloading position (H) (mm) 1200 (heightening)
Loading length (d) (mm) 1300 (extendable)
Climbing ability (°) ≤5
Maximum material carrying capacity (mm) ≤500×350
Belt speed (M / s) 0.8±5%
Conveying capacity (m 3 / h) ≤50
Main motor power (kw) eleven
Walking speed (km / h) one point four five
Rated working pressure (MPA) twenty-five
Opening pressure of safety valve (MPA) twenty-six
Electrical insulation strength (m Ω) three-phase one point five
Alternate one point five
Maximum dimension in transportation state (mm) long 5000±50
wide 1350±50
high 1500±50
Applicable minimum section (M2) 1.8×1.8

Construction cases

 Pipe jacking slag scraper.jpg

Xiangyang yonglitong Machinery Co., Ltd
Contact person: Manager Tong Tel: 0710-3725679 mobile phone: 178-7115-0018
Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province
All rights reserved: Xiangyang yonglitong Machinery Co., Ltd. all rights reserved, professional slag raking machine and ore raking machine manufacturer
Hubei ICP Bei 17006913-2      Website map

National hotline:
178-7115-0018

 Scan more wonderful! Scan more wonderful!